Journal Publications
Journal Publications: 2023
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | S. Surendarnath | ME | Optimization of Flow and Fluid Properties of Nanofluids to Enhance the Performance of Solar Flat Plate Collector using MCDM Technique | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2023 | Web of Science |
2. | S. Surendarnath | ME | Growth, electrical, electronic, NLO, spectral, SEM studies of LA crystals of macro, micro-scales for utilization in devices, displays and in micro-photonics | Journal of Materials Science: Materials in Electronics | 2023 | Web of Science |
3. | HarinadhVemanaboina | ME | Evaluation of residual stresses in CO2 laser beam welding of SS316L weldments using FEA | Materials Research Express | 2023 | Web of Science |
4. | HarinadhVemanaboina | ME | Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis | International Journal on Interactive Design and Manufacturing | 2023 | SCOPUS |
Journal Publications: 2022
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | MahamaniA. | ME | Mechanical Properties of Wire Arc Additive Manufacturing ER4043-AlN composites | International Journal of Mechanical Engineering | 2022 | SCOPUS |
2. | C.Vijaya Bhaskar Reddy | ME | A cogeneration cycle comparative analysis with parallel arrangement | Alexandria Engineering Journal | 2022 | Web of Science |
3. | HarinadhVemanaboina | ME | 3D Computational Welding Mechanics applied to IN625 Nickel-Base Alloy | Procedia Structural Integrity | 2022 | SCOPUS |
4. | G. Ranjith Kumar | ME | Metal additive manufacturing of commercial aerospace components – A comprehensive review | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022 | Web of Science |
5. | S. Surendarnath | ME | Optimization of engine parameters using NSGA II for the comprehensive reduction of emissions from VCR engine fuelled with ROME biodiesel | Environmental Science and Pollution Research | 2022 | Web of Science |
6. | S. Surendarnath | ME | Modelling and analysis of machining parameters of ECAP processed commercial pure aluminum using RSM and ANN | Surface Review and Letters | 2022 | Web of Science |
7. | S. Surendarnath | ME | Experimental Investigation on the Performance Characteristics and Emissions of a CI Engine Fueled with Enhanced Microwave-Assisted Karanja Seed Bio-Oil | Environmental Science and Pollution Research | 2022 | Web of Science |
8. | S. Surendarnath | ME | Dry Sliding Wear Behavior of Aluminum Alloy 6082 – SiC Composites through Ex-Situ Casting Process | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | 2022 | Web of Science |
9. | S. Surendarnath | ME | Studies on engine vibration isolation behaviours of Al6061-SiC metal matrix engine mounts for diesel engines | Materials Today Proceedings | 2022 | SCOPUS |
10. | S. Surendarnath | ME | Analytical Study of Deposition of TiO2 and SiO Multilayers for Blue Colour Display | AIP Conference Proceedings | 2022 | SCOPUS |
11. | S. Surendarnath | ME | Mechanical Properties and Microstructural characterisation of Al-5083 Mechanically Alloyed Powders Consolidated through ECAP Process | AIP Conference Proceedings | 2022 | SCOPUS |
12. | S. Surendarnath | ME | Effect of temperature on Structural Steel (IS 2062) through Equal Channel Angular Pressing | AIP Conference Proceedings | 2022 | SCOPUS |
13. | S. Arun Saco | ME | Cross-Flow Radiator Design Using CFD for FSAE Car Cooling System and Its Experimental Validation Using the GEMS Data Acquisition System | SAE Technical Paper | 2022 | SCOPUS |
14. | S. Arun Saco | ME | An Optimized Data Analysis on a Real-Time Application of PEM Fuel Cell Design by Using Machine Learning Algorithms | Algorithms | 2022 | ESCI |
15. | Harinadh Vemanaboina | ME | Residual Stress Distribution in Selective Laser Melting of SS316L Parts | Advances in Materials Science and Engineering | 2022 | Web of Science |
16. | Harinadh Vemanaboina | ME | FEA Comparative Studies on Heat Flux and Thermal Stress Analysis during Conduction Mode and Keyhole Mode in the Laser Beam Welding | Light Weight Materials | 2022 | SCOPUS |
Journal Publications: 2021
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | HarinadhVemanaboina | ME | Multipass dissimilar joints for SS316L to Inconel625 using gas tungsten arc welding | Materials today: proceedings | 2021 | SCOPUS |
2. | HarinadhVemanaboina | ME | Thermal and Mechanical Analysis of Multipass SS316L using GTAW Process | Materials today: proceedings | 2021 | SCOPUS |
3. | C.Ahilan | ME | Optimizing the welding parameters for Straight tube butt welding of dissimilar metals | Materials today: proceedings | 2021 | SCOPUS |
4. | Narayana K.L. | ME | Influence of Montmorillonite Clay Content on Thermal, Mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites | Silicon | 2021 | Web of Science |
5. | G. Ranjith Kumar | ME | Development of Biomedical Implants through Additive Manufacturing: A Review | Journal of Materials Engineering and Performance | 2021 | Web of Science |
6. | A. Mahamani, S. Jawahar, J.P.Davim | ME | Mechanism of surface generation in grinding AA6061-TiB2/ZrB2 in-situ composite | Journal of Computational and Applied Research in Mechanical Engineering | 2021 | Web of Science |
7. | Johny James | ME | Effect of Wettability and Uniform Distribution of Reinforcement Particle on Mechanical Property (Tensile) in Aluminum Metal Matrix Composite—A Review | Nanomaterial | 2021 | Web of Science |
8. | Vemanaboina. Harinadh, | ME | Mechanical and Metallurgical Properties of CO2 Laser Beam INCONEL 625 Welded Joints | Applied Sciences | 2021 | Web of Science |
9. | HarinadhVemanaboina, B Sridhar Babu | ME | Thermal and Residual Stress Distributions in Inconel 625 Butt-Welded Plates: Simulation and Experimental Validation | Advances in Materials Science and Engineering | 2021 | Web of Science |
10. | HarinadhVemanaboina, B Sridhar Babu | ME | Effect of Heat input on Distortions and Residual Stresses induced by Gas Tungsten Arc Welding in SS 316L to INCONEL625 multipass dissimilar welded joints | Advances in Materials Science and Engineering | 2021 | Web of Science |
11. | V. Velumani | ME | Effect of EGR (exhaust gas recirculation) in diesel engine with multi-walled carbon nanotubes and vegetable oil refinery waste as biodiesel | Fuel | 2021 | Web of Science |
12. | Surendarnath S | ME | Growth, characterizations and structural elucidation of Diethyl 2-(3-Oxoiso-1, 3-Dihydro Benzofuran-1-Ylidene) Malonate crystalline specimen for dielectric and electronic filters, thermal, optical, mechanical and biomedical applications using conventional experimental and theoretical practices | Journal of Materials Science: Materials in Electronics | 2021 | Web of Science |
Journal Publications: 2020
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | K. Ravindranath | ME | Experimental investigation on modified air abrasive jet machining (MAAJM) | Production & Manufacturing Research | 2020 | SCOPUS |
2. | Dr.C. Vijaya Bhaskar Reddy | ME | Modelling and Analysis of Modified Piston with Different Heated Barrier Coating Using Ansys | International Journal of Mechanical and Production Engineering Research and Development | 2020 | SCOPUS |
3. | C. Uma Maheswari | ME | Enhancement of the heat transfer of the dry cooling system using rotating radiator | International Journal of Mechanical and Production Engineering Research and Development | 2020 | SCOPUS |
4. | B Sridhar Babu, HarinadhVemanaboina | ME | Comparison of metallurgical and mechanical properties of dissimilar joint of AISI 316 and Monel 400 developed by pulsed and constant current gas tungsten arc welding processes | International Journal Advanced Manufacturing Technology | 2020 | Web of Science |
5. | HarinadhVemanaboina, | ME | Distortion control in Laser Beam Welding using Taguchi ANOVA analysis | FME Transactions | 2020 | SCOPUS |
6. | ,A.Mahamani | ME | Dry sliding wear behavior of A356-TiB2/TiC in-situ composites at ambient and elevated temperatures | International Journal of Materials Engineering Innovation | 2020 | SCOPUS |
7. | HarinadhVemanaboina | ME | Analysis of thermal stresses and its effect in the multipass welding process of SS316L | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2020 | Web of Science |
8. | A. Mahamani | ME | High Temperature Tensile Behavior of A356 -TiB2 / TiC In-Situ Composites | Iranian Journal of Materials Science & Engineering | 2020 | SCOPUS |
9. | Narayana, K.L | ME | Effect of MMT Clay on Mechanical, Thermal and Barrier Properties of Treated AloeveraFiber/ PLA-Hybrid Biocomposites | Silicon | 2020 | Web of Science |
10. | Narayana, K.L | ME | Effect of fiber hybridization and montmorillonite clay on properties of treated kenaf/aloe vera fiber reinforced PLA hybrid nanobiocomposite | cellulose | 2020 | Web of Science |
11. | C. Uma Maheswari | ME | Effect of iron scrap additives in stearic acid as PCM for thermal energy storage system | Journal of Thermal Analysis and Calorimetry | 2020 | Web of Science |
12. | Johny James S Hemakumar and Chun-Ping Jen |
ME | Studies on mechanical property of squeeze cast and heat treated AA6061-ZrO2 composite | Materials Research Express | 2020 | Web of Science |
13. | C.Ahilan | ME | A primary study of density and compressive strength of the silicon nitride and titanium nitride ceramic composite | Materials today: proceedings | 2020 | SCOPUS |
14. | HarinadhVemanaboina | ME | Evaluation of residual stress in multipass dissimilar butt joints using X-ray diffraction | Materials today: proceedings | 2020 | SCOPUS |
15. | C. Vijaya Bhaskar Reddy | ME | Experimental Investigation of YSZ Coated Piston Crown on Performance and Emission Features of LHR Diesel Engine with Mahua Biodiesel | IOP Conf. Series: Materials Science and Engineering, | 2020 | SCOPUS |
16. | A Mahamani | ME | Design and fabrication of screw feeding device in additive manufacturing | Materials today: proceedings | 2020 | SCOPUS |
17. | M.SivaramakrishaniahDr.C.V.Baskar Reddy P.Sreenivasulu | ME | Investigation of cutting forces in orthogonal metal cutting using Al2O3 coated and uncoated tungsten carbide tool | i-manager’s Journal on Material Science | 2020 | Others |
Journal Publications: 2019
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | K.L. Narayana | ME | Investigation of chemical absorption effects on mechanical properties of the kevlar/carbon fiber reinforced hybrid composites | International Journal of Mechanical and Production Engineering Research and Development | 2019 | SCOPUS |
2. | K. Ravindranath | ME | Experimental Investigation and Parametric Optimization in Abrasive Jet Machining on NICKEL 233 Alloy Using WASPAS | Journal of Advanced Manufacturing Systems | 2019 | SCOPUS |
3. | K.Ravindranath | ME | Parametric optimization in modified air abrasive jet machining | Multidiscipline Modeling in Materials and Structures | 2019 | SCOPUS |
4. | K.Ravindranath | ME | Experimental Study and Optimization in Modified Air Abrasive Jet Machining on Nickel-233 Alloy Using MCDM Techniques | Manufacturing Technology | 2019 | SCOPUS |
5. | K. L. Narayana | ME | Morphological and mechanical properties of treated kenaf fiber/MMT clay reinforced PLA hybrid biocomposite | AIP Conference Proceedings | 2019 | SCOPUS |
6. | A Mahamani | ME | Influence of Particle Size on Machinability Behavior in Turning of AA6061-AlN Composites | International Journal of Materials Forming and Machining Processes | 2019 | Others |
7. | A Mahamani | ME | Studies on the grinding force, size effect, surface texture, and mechanism of material removal in the grinding of AA6061-TiB2/ZrB2 in situ composite | Journal of Micromanufacturing | 2019 | Others |
Journal Publications: 2018
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | Ramesh P, Durga Prasad B, Narayana KL. |
ME | Characterization of kenaf fiber and its composites: A review | Journal of Reinforced Plastics and Composites | 2018 | Web of Science |
2. | C. Uma Maheswari | ME | Design and CFD analysis of food dryer using solar flat Plate collector and exhaust gas with Finned copper tubes | International Journal of Mechanical and Production Engineering Research and Development | 2018 | SCOPUS |
3. | Mr. M. Sivarama Krishnaiah | ME | Numerical and Experimental Validation of Chip Morphology | International Journal of Advanced Research in Engineering and Technology | 2018 | SCOPUS |
4. | K. Ravindranath | ME | Experimental Investigation and Parametric Optimization in Abrasive Jet Machining on Nickel 233 Alloy Using WASPAS and MOORA | Cogent Engineering | 2018 | SCOPUS |
5. | P. Sneha, A. Mahamani | ME | Optimization of Wire Electric Discharge Machining Parameters in Machining of Ti-6Al-4VAlloy | Materials today: proceedings | 2018 | SCOPUS |
6. | C Uma Maheswari | ME | CFD and experimental analysis of solar crop dryer with waste heat recovery system of exhaust gas from diesel engine | IOP Conference Series: Earth and Environmental Science | 2018 | SCOPUS |
7. | A Mahamani,S Jawahar, | ME | Influence of grinding parameters on grinding force and temperature in grinding of AA6061-TiB2/ZrB2 in-situ composite | IOP Conf. Series: Materials Science and Engineering, | 2018 | SCOPUS |
8. | A Mahamani,S Jawahar, | ME | Mono and multi-response optimization of 3D printer parameters to attain improved hardness and surface roughness | IOP Conf. Series: Materials Science and Engineering, | 2018 | SCOPUS |
9. | A. Mahamani | ME | Optimization of machining parameters using Entropy VIKOR method in drilling of A356-TiB2/TiC in-situ Composites | IOP Conf. Series: Materials Science and Engineering, | 2018 | SCOPUS |
10. | C Uma Maheswari | ME | CFD Analysis of different types of single basin solar stills | IOP Conf. Series: Materials Science and Engineering, | 2018 | SCOPUS |
11. | Gunturu Mohan, C. Vijayabhaskar Reddy | ME | Design Analysis, Simulation and Fabrication of Spur Gear Cutting Attachment for Lathe Machine | International Journal for Research in Engineering Application & Management | 2018 | Others |
12. | C.Umamaheswari | ME | The Effect of Various Parameters in Different Type of Heat Exchangers | I-manager’s Journal on Mechanical Engineering | 2018 | Others |
13. | A.Mahamani | ME | Investigation on Cutting Force, Flank Wear, and Surface Roughness in Machining of the A356-TiB2/TiC in-situ Composites | International Journal of Materials Forming and Machining Processes | 2018 | Others |
14. | Dr.A. Mahamani | ME | Machining Parameters Optimization in Turning of Aluminum Nitride (AlN) Particulate Reinforced Aluminium Matrix Composites | Journal of Manufacturing Engineering | 2018 | Others |
Journal Publications: 2017
S.No. | Name of the author/s | Department of the teacher | Title of paper | Name of journal | Year of publication | Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
1. | Dr.A.Mahamani | ME | Dry sliding wear and friction characteristics of AA6061 – TiB2/ZrB2 in-situ metal matrix composites at room temperature | International Journal of Surface Sciences and Engineering | 2017 | Web of Science |
Books Published
Academic Year 2020-21(Revised)
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Academic Year 2019-20 (Revised)
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Academic Year 2018-19
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Book Chapters Published
S.No. | Name of the Faculty | Title of the Book Chapter | Page No. | Month & Year | Name of Authors (As Published) | Name of the Publisher |
1. | Dr. V. Harinadh | A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600 (Advances in Lightweight Materials and Structures) | 561 – 568 | 2020 | Harinadh Vemanaboina,
Gopi Chandh R, Siva krishna P, Kishore Kumar A, Malli Karjuna K, Sailinga Reddy Y |
Springer Nature. ISBN No: 978-981-15-7826-7 |
2. | Mr. M.Sivaramakrishnaiah | Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece (Intelligent Manufacturing and Energy Sustainability,Smart Innovation, Systems and Technologies) | 441 – 451 | 2020 | Sivaramakrishnaiah M,
Nandakumar P, Rangajanardhana G |
Springer Nature. ISBN No: 978-981-15-1615-3 |
3. | Dr. C. Ahilan | Fatigue Characterization and Fractographic Analysis of Aluminium 6063 Alloy ( Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials) | 176 – 194 | 2021 | Sreearravind M.
Ramesh Kumar S. Ahilan C. |
IGI Global Publisher. |
4. | Dr. V. Harinadh |
FEA Comparative Studies on Heat Flux and Thermal Stress Analysis during Conduction Mode and Keyhole Mode in the Laser Beam Welding (Light Weight Materials: Processing and Characterization) |
143 – 157 | 2022 | Harinadh Vemanaboina,
Suresh Akella, Ramesh Kumar Buddu |
John Wiley. ISBN No: 9781786307972 |
Patents Published / Submitted by the Faculty
S.No. | Name of the Faculty | Patent Title | Award Date |
1. | Dr. S. Arun Saco
|
Robot for Sanitization and Mask Detection | Submitted (350040-001) |
2. | Dr. C. Vijaya Bhaskar Reddy
|
IoT Based Optimal Management of Smart Farms Using Wind Power System |
2021100809 |
Seminars / Workshops / E-Conference & Webinars Organized by the Department
Sl.No. | Title of the Program | Date & Year |
2018 – 19 | ||
1. | One-week hands on training in CNC & Robotics programming in manufacturing industries | 14thto 19th December 2018 |
2. | One-week hands on training workshop on Ansys/LS Dyna | 14thto 19thDecember 2018 |
3. | One week “Basic Robotics” course by APSSDC | 11th to 16th February 2019 |
4. | One week “Turning-NC control programming” course by APSSDC | 11th to 16th February 2019 |
5. | One week “Turning-NC control programming” course by APSSDC | 18th to 23rd February 2019 |
2019 – 20 | ||
6. | One week “ROBCAD Basics” course by APSSDC | 05th to 10th August 2019 |
7. | Two-day Workshop on “Outcome Based Education” | 6th to 7thDecember 2019 |
8. | Students symposium ( I-Technofest) | 27th to 29thFebruary 2020 |
9. | Robotics Workshop- Hands on Training | 27thto 29thFebruary 2020 |
10. | GOKARTING | 21stto 29thFebruary 2020 |
11. | Three days online webinar on Research Areas in mechanical Engineering | 16th to 18th June 2020 |
12. | One Week International Faculty Development Programme on Research challenges in Mechanical Engineering | 22nd to 27thJune 2020 |
2020 – 21 | ||
13. | Four days Webinar on “Advances in Machining and Metal Joining Process” | 04th to 07th January 2021 |
14. | Three days Webinar on “Powering the future through MEMS, Nano Materials and Advanced Coatings” | 27th to 29th January 2021 |
15. | Four days webinar on “Why & How to Learn Computational Fluid Dynamics” | 03rd– 05th February 2021 |
16. | 3rd National Conference on Recent Advances in Mechanical Engineering (RAME 2K21) | 07th& 08th June 2021 |
Papers Presented in International / National Conferences by the Faculty
S.No. | Name of the Faculty | Title of the Paper | Name of the Conference | Organizing Institution | Dates |
1. | Mr.P.Kumar | Additive Manufacturing – A Literature Review | Second International Conference on Sustainable Energy Resources, Materials and Technologies | SSN College of Engineering (Autonomous), Kalavakkam, Chennai. | 14-15 March, 2019 |
2. | Mr. M. Sivarama Krishnaiah, | Experimental, FEA simulation of Thermal-Fluid interaction between TIN coated Tungsten Carbide tool and Inconel 825 work piece | International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES-2019) | Malla Reddy college of Engineering & Technology (Autonomous), Hyderabad. | 21st and 22nd June, 2019 |
3. | Dr. S. Surendarnath | Effect of temperature on Structural Steel (IS 2062) through Equal Channel Angular Pressing | International Conference on Materials Research in Science and Engineering (KMRSE’21) | Kumaraguru College of Technology, Coimbatore, Tamil Nadu | July
23 – 25, 2021 |
4. | Dr. S. Surendarnath | Mechanical Properties and Microstructural characterisation of Al-5083 Mechanically Alloyed Powders Consolidated through ECAP Process | International Conference on Materials Research in Science and Engineering (KMRSE’21) | Kumaraguru College of Technology, Coimbatore, Tamil Nadu | July
23 – 25, 2021 |
5. | Dr. S. Surendarnath | Numerical Simulation on Ship blast Analysis using Ansys Software | First International Conference on Advancements in Engineering, Management, Science and Technology (ICEMST 2021) | CSI College of Engineering, Ketti, Tamil Nadu | September 10-11, 2021 |
6. | Dr. S. Surendarnath | Design and Analysis of ECO Challenge car chassis with different Profiles | First International Conference on Advancements in Engineering, Management, Science and Technology (ICEMST 2021) | CSI College of Engineering, Ketti, Tamil Nadu | September 10-11, 2021 |
7. | Dr. S. Surendarnath | Effect of cooling conditions on microstructure evolution AISI 4140 Steel during quenching | Virtual International conference on Product Design, Development and Deployment (PD3 2021) | VIT University, Vellore, Tamil Nadu | September 11-12, 2021 |
8. | Dr. S. Surendarnath | Effect of soaking period on the evolution of microstructure and machinability of H13 steel during heat treatment | Virtual International conference on Product Design, Development and Deployment (PD3 2021) | VIT University, Vellore, Tamil Nadu | September 11-12, 2021 |
9. | Dr. G. Ranjith Kumar | Gesture Control Prototype for Handicapped People | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
10. | Dr. C. Vijaya Bhaskara Reddy | Conversion of a 4-stroke single Cylinder Diesel Engine in to an HCCI Engine and Experimental Analysis of Emission Characteristics and Efficiency using Ethanol Blends | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
11. | Dr. V. Harinadh | Microstructure and Mechanical Properties of Hexagonal Key using Selective Laser Melting (SLM) | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
12. | Dr. C. Uma Maheswari | Experimental study on Effect of Process Parameters in CNC Turning of Brass using Taguchi Method | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
13. | Dr. S. Johny James | Study of Tribological and Mechanical Properties of Composite Reinforced with Tungsten Carbide | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
14. | Dr. S. Arunsaco | Heat transfer characteristics on solar air heater with trapezoidal duct and curved absorber plate using CFD code | 3rd International Conference on Manufacturing, Material Science and Engineering 2021 | CMR Institute of Technology, Hyderabad | 24th& 25th September 2021 |
15. | Dr. S. Surendarnath | Dry Sliding Wear Behavior of AA6082 reinforced with SiC Particles through ex-situ Casting techniques | 2nd Virtual Tribology Research Symposium (ITRS 2021) | SRM University, Chennai, Tamil Nadu | December 08 – 10, 2021 |
16. | Dr. S. Surendarnath | Investigation on Tribological behavior of AA7075 reinforced with SiC & TiC Composites for Automobile Applications | 2nd Virtual Tribology Research Symposium (ITRS 2021) | SRM University, Chennai, Tamil Nadu | December 08 – 10, 2021 |
17. | Dr. S. Surendarnath | Wear Characteristics of Hot Dip Aluminized of Mild Steel | 2nd Virtual Tribology Research Symposium (ITRS 2021) | SRM University, Chennai, Tamil Nadu | December 08 – 10, 2021 |
18. | Dr. S. Surendarnath | Studies on Engine Vibration Isolation Behaviors of AA6061-SiC Metal Matrix Engine Mounts for Diesel Engines | International Conference on Thermal Analysis and Energy Systems (ICTAES 2021) | Heat Pump Research Institute Associate with Al-Frabi Kazakh National University, Republic of Kazakhastan | December 22 – 24, 2021 |
19. | Dr. S. Surendarnath | Optimization of Properties of Nanofluids to enhance the heat transfer characteristics and Collector Efficiency of Solar Flat Plate Collector using MCDM Technique | International Conference on Thermal Analysis and Energy Systems (ICTAES 2021) | Heat Pump Research Institute Associate with Al-Frabi Kazakh National University, Republic of Kazakhastan | December 22 – 24, 2021 |