Journal Publications
Journal Publications: 2023
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
S. Surendarnath |
ME |
Optimization of Flow and Fluid Properties of Nanofluids to Enhance the Performance of Solar Flat Plate Collector using MCDM Technique |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
2023 |
Web of Science |
| 2. |
S. Surendarnath |
ME |
Growth, electrical, electronic, NLO, spectral, SEM studies of LA crystals of macro, micro-scales for utilization in devices, displays and in micro-photonics |
Journal of Materials Science: Materials in Electronics |
2023 |
Web of Science |
| 3. |
HarinadhVemanaboina |
ME |
Evaluation of residual stresses in CO2 laser beam welding of SS316L weldments using FEA |
Materials Research Express |
2023 |
Web of Science |
| 4. |
HarinadhVemanaboina |
ME |
Prediction of thermal and residual stress distributions in SS304 materials for nuclear application using finite element analysis |
International Journal on Interactive Design and Manufacturing |
2023 |
SCOPUS |
Journal Publications: 2022
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
MahamaniA. |
ME |
Mechanical Properties of Wire Arc Additive Manufacturing ER4043-AlN composites |
International Journal of Mechanical Engineering |
2022 |
SCOPUS |
| 2. |
C.Vijaya Bhaskar Reddy |
ME |
A cogeneration cycle comparative analysis with parallel arrangement |
Alexandria Engineering Journal |
2022 |
Web of Science |
| 3. |
HarinadhVemanaboina |
ME |
3D Computational Welding Mechanics applied to IN625 Nickel-Base Alloy |
Procedia Structural Integrity |
2022 |
SCOPUS |
| 4. |
G. Ranjith Kumar |
ME |
Metal additive manufacturing of commercial aerospace components – A comprehensive review |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
2022 |
Web of Science |
| 5. |
S. Surendarnath |
ME |
Optimization of engine parameters using NSGA II for the comprehensive reduction of emissions from VCR engine fuelled with ROME biodiesel |
Environmental Science and Pollution Research |
2022 |
Web of Science |
| 6. |
S. Surendarnath |
ME |
Modelling and analysis of machining parameters of ECAP processed commercial pure aluminum using RSM and ANN |
Surface Review and Letters |
2022 |
Web of Science |
| 7. |
S. Surendarnath |
ME |
Experimental Investigation on the Performance Characteristics and Emissions of a CI Engine Fueled with Enhanced Microwave-Assisted Karanja Seed Bio-Oil |
Environmental Science and Pollution Research |
2022 |
Web of Science |
| 8. |
S. Surendarnath |
ME |
Dry Sliding Wear Behavior of Aluminum Alloy 6082 – SiC Composites through Ex-Situ Casting Process |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
2022 |
Web of Science |
| 9. |
S. Surendarnath |
ME |
Studies on engine vibration isolation behaviours of Al6061-SiC metal matrix engine mounts for diesel engines |
Materials Today Proceedings |
2022 |
SCOPUS |
| 10. |
S. Surendarnath |
ME |
Analytical Study of Deposition of TiO2 and SiO Multilayers for Blue Colour Display |
AIP Conference Proceedings |
2022 |
SCOPUS |
| 11. |
S. Surendarnath |
ME |
Mechanical Properties and Microstructural characterisation of Al-5083 Mechanically Alloyed Powders Consolidated through ECAP Process |
AIP Conference Proceedings |
2022 |
SCOPUS |
| 12. |
S. Surendarnath |
ME |
Effect of temperature on Structural Steel (IS 2062) through Equal Channel Angular Pressing |
AIP Conference Proceedings |
2022 |
SCOPUS |
| 13. |
S. Arun Saco |
ME |
Cross-Flow Radiator Design Using CFD for FSAE Car Cooling System and Its Experimental Validation Using the GEMS Data Acquisition System |
SAE Technical Paper |
2022 |
SCOPUS |
| 14. |
S. Arun Saco |
ME |
An Optimized Data Analysis on a Real-Time Application of PEM Fuel Cell Design by Using Machine Learning Algorithms |
Algorithms |
2022 |
ESCI |
| 15. |
Harinadh Vemanaboina |
ME |
Residual Stress Distribution in Selective Laser Melting of SS316L Parts |
Advances in Materials Science and Engineering |
2022 |
Web of Science |
| 16. |
Harinadh Vemanaboina |
ME |
FEA Comparative Studies on Heat Flux and Thermal Stress Analysis during Conduction Mode and Keyhole Mode in the Laser Beam Welding |
Light Weight Materials |
2022 |
SCOPUS |
Journal Publications: 2021
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
HarinadhVemanaboina |
ME |
Multipass dissimilar joints for SS316L to Inconel625 using gas tungsten arc welding |
Materials today: proceedings |
2021 |
SCOPUS |
| 2. |
HarinadhVemanaboina |
ME |
Thermal and Mechanical Analysis of Multipass SS316L using GTAW Process |
Materials today: proceedings |
2021 |
SCOPUS |
| 3. |
C.Ahilan |
ME |
Optimizing the welding parameters for Straight tube butt welding of dissimilar metals |
Materials today: proceedings |
2021 |
SCOPUS |
| 4. |
Narayana K.L. |
ME |
Influence of Montmorillonite Clay Content on Thermal, Mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites |
Silicon |
2021 |
Web of Science |
| 5. |
G. Ranjith Kumar |
ME |
Development of Biomedical Implants through Additive Manufacturing: A Review |
Journal of Materials Engineering and Performance |
2021 |
Web of Science |
| 6. |
A. Mahamani, S. Jawahar, J.P.Davim |
ME |
Mechanism of surface generation in grinding AA6061-TiB2/ZrB2 in-situ composite |
Journal of Computational and Applied Research in Mechanical Engineering |
2021 |
Web of Science |
| 7. |
Johny James |
ME |
Effect of Wettability and Uniform Distribution of Reinforcement Particle on Mechanical Property (Tensile) in Aluminum Metal Matrix Composite—A Review |
Nanomaterial |
2021 |
Web of Science |
| 8. |
Vemanaboina. Harinadh, |
ME |
Mechanical and Metallurgical Properties of CO2 Laser Beam INCONEL 625 Welded Joints |
Applied Sciences |
2021 |
Web of Science |
| 9. |
HarinadhVemanaboina, B Sridhar Babu |
ME |
Thermal and Residual Stress Distributions in Inconel 625 Butt-Welded Plates: Simulation and Experimental Validation |
Advances in Materials Science and Engineering |
2021 |
Web of Science |
| 10. |
HarinadhVemanaboina, B Sridhar Babu |
ME |
Effect of Heat input on Distortions and Residual Stresses induced by Gas Tungsten Arc Welding in SS 316L to INCONEL625 multipass dissimilar welded joints |
Advances in Materials Science and Engineering |
2021 |
Web of Science |
| 11. |
V. Velumani |
ME |
Effect of EGR (exhaust gas recirculation) in diesel engine with multi-walled carbon nanotubes and vegetable oil refinery waste as biodiesel |
Fuel |
2021 |
Web of Science |
| 12. |
Surendarnath S |
ME |
Growth, characterizations and structural elucidation of Diethyl 2-(3-Oxoiso-1, 3-Dihydro Benzofuran-1-Ylidene) Malonate crystalline specimen for dielectric and electronic filters, thermal, optical, mechanical and biomedical applications using conventional experimental and theoretical practices |
Journal of Materials Science: Materials in Electronics |
2021 |
Web of Science |
Journal Publications: 2020
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
K. Ravindranath |
ME |
Experimental investigation on modified air abrasive jet machining (MAAJM) |
Production & Manufacturing Research |
2020 |
SCOPUS |
| 2. |
Dr.C. Vijaya Bhaskar Reddy |
ME |
Modelling and Analysis of Modified Piston with Different Heated Barrier Coating Using Ansys |
International Journal of Mechanical and Production Engineering Research and Development |
2020 |
SCOPUS |
| 3. |
C. Uma Maheswari |
ME |
Enhancement of the heat transfer of the dry cooling system using rotating radiator |
International Journal of Mechanical and Production Engineering Research and Development |
2020 |
SCOPUS |
| 4. |
B Sridhar Babu, HarinadhVemanaboina |
ME |
Comparison of metallurgical and mechanical properties of dissimilar joint of AISI 316 and Monel 400 developed by pulsed and constant current gas tungsten arc welding processes |
International Journal Advanced Manufacturing Technology |
2020 |
Web of Science |
| 5. |
HarinadhVemanaboina, |
ME |
Distortion control in Laser Beam Welding using Taguchi ANOVA analysis |
FME Transactions |
2020 |
SCOPUS |
| 6. |
,A.Mahamani |
ME |
Dry sliding wear behavior of A356-TiB2/TiC in-situ composites at ambient and elevated temperatures |
International Journal of Materials Engineering Innovation |
2020 |
SCOPUS |
| 7. |
HarinadhVemanaboina |
ME |
Analysis of thermal stresses and its effect in the multipass welding process of SS316L |
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering |
2020 |
Web of Science |
| 8. |
A. Mahamani |
ME |
High Temperature Tensile Behavior of A356 -TiB2 / TiC In-Situ Composites |
Iranian Journal of Materials Science & Engineering |
2020 |
SCOPUS |
| 9. |
Narayana, K.L |
ME |
Effect of MMT Clay on Mechanical, Thermal and Barrier Properties of Treated AloeveraFiber/ PLA-Hybrid Biocomposites |
Silicon |
2020 |
Web of Science |
| 10. |
Narayana, K.L |
ME |
Effect of fiber hybridization and montmorillonite clay on properties of treated kenaf/aloe vera fiber reinforced PLA hybrid nanobiocomposite |
cellulose |
2020 |
Web of Science |
| 11. |
C. Uma Maheswari |
ME |
Effect of iron scrap additives in stearic acid as PCM for thermal energy storage system |
Journal of Thermal Analysis and Calorimetry |
2020 |
Web of Science |
| 12. |
Johny James
S Hemakumar and Chun-Ping Jen |
ME |
Studies on mechanical property of squeeze cast and heat treated AA6061-ZrO2 composite |
Materials Research Express |
2020 |
Web of Science |
| 13. |
C.Ahilan |
ME |
A primary study of density and compressive strength of the silicon nitride and titanium nitride ceramic composite |
Materials today: proceedings |
2020 |
SCOPUS |
| 14. |
HarinadhVemanaboina |
ME |
Evaluation of residual stress in multipass dissimilar butt joints using X-ray diffraction |
Materials today: proceedings |
2020 |
SCOPUS |
| 15. |
C. Vijaya Bhaskar Reddy |
ME |
Experimental Investigation of YSZ Coated Piston Crown on Performance and Emission Features of LHR Diesel Engine with Mahua Biodiesel |
IOP Conf. Series: Materials Science and Engineering, |
2020 |
SCOPUS |
| 16. |
A Mahamani |
ME |
Design and fabrication of screw feeding device in additive manufacturing |
Materials today: proceedings |
2020 |
SCOPUS |
| 17. |
M.SivaramakrishaniahDr.C.V.Baskar Reddy P.Sreenivasulu |
ME |
Investigation of cutting forces in orthogonal metal cutting using Al2O3 coated and uncoated tungsten carbide tool |
i-manager’s Journal on Material Science |
2020 |
Others |
Journal Publications: 2019
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
K.L. Narayana |
ME |
Investigation of chemical absorption effects on mechanical properties of the kevlar/carbon fiber reinforced hybrid composites |
International Journal of Mechanical and Production Engineering Research and Development |
2019 |
SCOPUS |
| 2. |
K. Ravindranath |
ME |
Experimental Investigation and Parametric Optimization in Abrasive Jet Machining on NICKEL 233 Alloy Using WASPAS |
Journal of Advanced Manufacturing Systems |
2019 |
SCOPUS |
| 3. |
K.Ravindranath |
ME |
Parametric optimization in modified air abrasive jet machining |
Multidiscipline Modeling in Materials and Structures |
2019 |
SCOPUS |
| 4. |
K.Ravindranath |
ME |
Experimental Study and Optimization in Modified Air Abrasive Jet Machining on Nickel-233 Alloy Using MCDM Techniques |
Manufacturing Technology |
2019 |
SCOPUS |
| 5. |
K. L. Narayana |
ME |
Morphological and mechanical properties of treated kenaf fiber/MMT clay reinforced PLA hybrid biocomposite |
AIP Conference Proceedings |
2019 |
SCOPUS |
| 6. |
A Mahamani |
ME |
Influence of Particle Size on Machinability Behavior in Turning of AA6061-AlN Composites |
International Journal of Materials Forming and Machining Processes |
2019 |
Others |
| 7. |
A Mahamani |
ME |
Studies on the grinding force, size effect, surface texture, and mechanism of material removal in the grinding of AA6061-TiB2/ZrB2 in situ composite |
Journal of Micromanufacturing |
2019 |
Others |
Journal Publications: 2018
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
Ramesh P,
Durga Prasad B, Narayana KL. |
ME |
Characterization of kenaf fiber and its composites: A review |
Journal of Reinforced Plastics and Composites |
2018 |
Web of Science |
| 2. |
C. Uma Maheswari |
ME |
Design and CFD analysis of food dryer using solar flat Plate collector and exhaust gas with Finned copper tubes |
International Journal of Mechanical and Production Engineering Research and Development |
2018 |
SCOPUS |
| 3. |
Mr. M. Sivarama Krishnaiah |
ME |
Numerical and Experimental Validation of Chip Morphology |
International Journal of Advanced Research in Engineering and Technology |
2018 |
SCOPUS |
| 4. |
K. Ravindranath |
ME |
Experimental Investigation and Parametric Optimization in Abrasive Jet Machining on Nickel 233 Alloy Using WASPAS and MOORA |
Cogent Engineering |
2018 |
SCOPUS |
| 5. |
P. Sneha, A. Mahamani |
ME |
Optimization of Wire Electric Discharge Machining Parameters in Machining of Ti-6Al-4VAlloy |
Materials today: proceedings |
2018 |
SCOPUS |
| 6. |
C Uma Maheswari |
ME |
CFD and experimental analysis of solar crop dryer with waste heat recovery system of exhaust gas from diesel engine |
IOP Conference Series: Earth and Environmental Science |
2018 |
SCOPUS |
| 7. |
A Mahamani,S Jawahar, |
ME |
Influence of grinding parameters on grinding force and temperature in grinding of AA6061-TiB2/ZrB2 in-situ composite |
IOP Conf. Series: Materials Science and Engineering, |
2018 |
SCOPUS |
| 8. |
A Mahamani,S Jawahar, |
ME |
Mono and multi-response optimization of 3D printer parameters to attain improved hardness and surface roughness |
IOP Conf. Series: Materials Science and Engineering, |
2018 |
SCOPUS |
| 9. |
A. Mahamani |
ME |
Optimization of machining parameters using Entropy VIKOR method in drilling of A356-TiB2/TiC in-situ Composites |
IOP Conf. Series: Materials Science and Engineering, |
2018 |
SCOPUS |
| 10. |
C Uma Maheswari |
ME |
CFD Analysis of different types of single basin solar stills |
IOP Conf. Series: Materials Science and Engineering, |
2018 |
SCOPUS |
| 11. |
Gunturu Mohan, C. Vijayabhaskar Reddy |
ME |
Design Analysis, Simulation and Fabrication of Spur Gear Cutting Attachment for Lathe Machine |
International Journal for Research in Engineering Application & Management |
2018 |
Others |
| 12. |
C.Umamaheswari |
ME |
The Effect of Various Parameters in Different Type of Heat Exchangers |
I-manager’s Journal on Mechanical Engineering |
2018 |
Others |
| 13. |
A.Mahamani |
ME |
Investigation on Cutting Force, Flank Wear, and Surface Roughness in Machining of the A356-TiB2/TiC in-situ Composites |
International Journal of Materials Forming and Machining Processes |
2018 |
Others |
| 14. |
Dr.A. Mahamani |
ME |
Machining Parameters Optimization in Turning of Aluminum Nitride (AlN) Particulate Reinforced Aluminium Matrix Composites |
Journal of Manufacturing Engineering |
2018 |
Others |
Journal Publications: 2017
| S.No. |
Name of the author/s |
Department of the teacher |
Title of paper |
Name of journal |
Year of publication |
Is it listed in UGC Care list/Scopus/Web of Science/Others, mention |
| 1. |
Dr.A.Mahamani |
ME |
Dry sliding wear and friction characteristics of AA6061 – TiB2/ZrB2 in-situ metal matrix composites at room temperature |
International Journal of Surface Sciences and Engineering |
2017 |
Web of Science |
Books Published
Academic Year 2020-21(Revised)
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Academic Year 2019-20 (Revised)
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Academic Year 2018-19
- Machine Drawing by Dr. C.VijayaBhaskar Reddy, Mr. R.Rajesh and Mr. R.Suresh, Falcon Publications, Hyderabad, India.
- Production Drawingby Mr. R.Rajesh, Mr.R.Suresh and Mr. P.Sreenivasulu, Falcon Publications, Hyderabad, India.
Book Chapters Published
| S.No. |
Name of the Faculty |
Title of the Book Chapter |
Page No. |
Month & Year |
Name of Authors (As Published) |
Name of the Publisher |
| 1. |
Dr. V. Harinadh |
A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600 (Advances in Lightweight Materials and Structures) |
561 – 568 |
2020 |
Harinadh Vemanaboina,
Gopi Chandh R,
Siva krishna P,
Kishore Kumar A,
Malli Karjuna K,
Sailinga Reddy Y |
Springer Nature. ISBN No: 978-981-15-7826-7 |
| 2. |
Mr. M.Sivaramakrishnaiah |
Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece (Intelligent Manufacturing and Energy Sustainability,Smart Innovation, Systems and Technologies) |
441 – 451 |
2020 |
Sivaramakrishnaiah M,
Nandakumar P,
Rangajanardhana G |
Springer Nature. ISBN No: 978-981-15-1615-3 |
| 3. |
Dr. C. Ahilan |
Fatigue Characterization and Fractographic Analysis of Aluminium 6063 Alloy ( Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials) |
176 – 194 |
2021 |
Sreearravind M.
Ramesh Kumar S.
Ahilan C. |
IGI Global Publisher. |
| 4. |
Dr. V. Harinadh |
FEA Comparative Studies on Heat Flux and Thermal Stress Analysis during Conduction Mode and Keyhole Mode in the Laser Beam Welding (Light Weight Materials: Processing and Characterization)
|
143 – 157 |
2022 |
Harinadh Vemanaboina,
Suresh Akella,
Ramesh Kumar Buddu |
John Wiley. ISBN No: 9781786307972 |
Patents Published / Submitted by the Faculty
| S.No. |
Name of the Faculty |
Patent Title |
Award Date |
| 1. |
Dr. S. Arun Saco
|
Robot for Sanitization and Mask Detection |
Submitted (350040-001) |
| 2. |
Dr. C. Vijaya Bhaskar Reddy
|
IoT Based Optimal Management of Smart Farms Using Wind Power System |
2021100809 |
Seminars / Workshops / E-Conference & Webinars Organized by the Department
| Sl.No. |
Title of the Program |
Date & Year |
| 2018 – 19 |
| 1. |
One-week hands on training in CNC & Robotics programming in manufacturing industries |
14thto 19th December 2018 |
| 2. |
One-week hands on training workshop on Ansys/LS Dyna |
14thto 19thDecember 2018 |
| 3. |
One week “Basic Robotics” course by APSSDC |
11th to 16th February 2019 |
| 4. |
One week “Turning-NC control programming” course by APSSDC |
11th to 16th February 2019 |
| 5. |
One week “Turning-NC control programming” course by APSSDC |
18th to 23rd February 2019 |
| 2019 – 20 |
| 6. |
One week “ROBCAD Basics” course by APSSDC |
05th to 10th August 2019 |
| 7. |
Two-day Workshop on “Outcome Based Education” |
6th to 7thDecember 2019 |
| 8. |
Students symposium ( I-Technofest) |
27th to 29thFebruary 2020 |
| 9. |
Robotics Workshop- Hands on Training |
27thto 29thFebruary 2020 |
| 10. |
GOKARTING |
21stto 29thFebruary 2020 |
| 11. |
Three days online webinar on Research Areas in mechanical Engineering |
16th to 18th June 2020 |
| 12. |
One Week International Faculty Development Programme on Research challenges in Mechanical Engineering |
22nd to 27thJune 2020 |
| 2020 – 21 |
| 13. |
Four days Webinar on “Advances in Machining and Metal Joining Process” |
04th to 07th January 2021 |
| 14. |
Three days Webinar on “Powering the future through MEMS, Nano Materials and Advanced Coatings” |
27th to 29th January 2021 |
| 15. |
Four days webinar on “Why & How to Learn Computational Fluid Dynamics” |
03rd– 05th February 2021 |
| 16. |
3rd National Conference on Recent Advances in Mechanical Engineering (RAME 2K21) |
07th& 08th June 2021 |
Papers Presented in International / National Conferences by the Faculty
| S.No. |
Name of the Faculty |
Title of the Paper |
Name of the Conference |
Organizing Institution |
Dates |
| 1. |
Mr.P.Kumar |
Additive Manufacturing – A Literature Review |
Second International Conference on Sustainable Energy Resources, Materials and Technologies |
SSN College of Engineering (Autonomous), Kalavakkam, Chennai. |
14-15 March, 2019 |
| 2. |
Mr. M. Sivarama Krishnaiah, |
Experimental, FEA simulation of Thermal-Fluid interaction between TIN coated Tungsten Carbide tool and Inconel 825 work piece |
International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES-2019) |
Malla Reddy college of Engineering & Technology (Autonomous), Hyderabad. |
21st and 22nd June, 2019 |
| 3. |
Dr. S. Surendarnath |
Effect of temperature on Structural Steel (IS 2062) through Equal Channel Angular Pressing |
International Conference on Materials Research in Science and Engineering (KMRSE’21) |
Kumaraguru College of Technology, Coimbatore, Tamil Nadu |
July
23 – 25, 2021 |
| 4. |
Dr. S. Surendarnath |
Mechanical Properties and Microstructural characterisation of Al-5083 Mechanically Alloyed Powders Consolidated through ECAP Process |
International Conference on Materials Research in Science and Engineering (KMRSE’21) |
Kumaraguru College of Technology, Coimbatore, Tamil Nadu |
July
23 – 25, 2021 |
| 5. |
Dr. S. Surendarnath |
Numerical Simulation on Ship blast Analysis using Ansys Software |
First International Conference on Advancements in Engineering, Management, Science and Technology (ICEMST 2021) |
CSI College of Engineering, Ketti, Tamil Nadu |
September 10-11, 2021 |
| 6. |
Dr. S. Surendarnath |
Design and Analysis of ECO Challenge car chassis with different Profiles |
First International Conference on Advancements in Engineering, Management, Science and Technology (ICEMST 2021) |
CSI College of Engineering, Ketti, Tamil Nadu |
September 10-11, 2021 |
| 7. |
Dr. S. Surendarnath |
Effect of cooling conditions on microstructure evolution AISI 4140 Steel during quenching |
Virtual International conference on Product Design, Development and Deployment (PD3 2021) |
VIT University, Vellore, Tamil Nadu |
September 11-12, 2021 |
| 8. |
Dr. S. Surendarnath |
Effect of soaking period on the evolution of microstructure and machinability of H13 steel during heat treatment |
Virtual International conference on Product Design, Development and Deployment (PD3 2021) |
VIT University, Vellore, Tamil Nadu |
September 11-12, 2021 |
| 9. |
Dr. G. Ranjith Kumar |
Gesture Control Prototype for Handicapped People |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 10. |
Dr. C. Vijaya Bhaskara Reddy |
Conversion of a 4-stroke single Cylinder Diesel Engine in to an HCCI Engine and Experimental Analysis of Emission Characteristics and Efficiency using Ethanol Blends |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 11. |
Dr. V. Harinadh |
Microstructure and Mechanical Properties of Hexagonal Key using Selective Laser Melting (SLM) |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 12. |
Dr. C. Uma Maheswari |
Experimental study on Effect of Process Parameters in CNC Turning of Brass using Taguchi Method |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 13. |
Dr. S. Johny James |
Study of Tribological and Mechanical Properties of Composite Reinforced with Tungsten Carbide |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 14. |
Dr. S. Arunsaco |
Heat transfer characteristics on solar air heater with trapezoidal duct and curved absorber plate using CFD code |
3rd International Conference on Manufacturing, Material Science and Engineering 2021 |
CMR Institute of Technology, Hyderabad |
24th& 25th September 2021 |
| 15. |
Dr. S. Surendarnath |
Dry Sliding Wear Behavior of AA6082 reinforced with SiC Particles through ex-situ Casting techniques |
2nd Virtual Tribology Research Symposium (ITRS 2021) |
SRM University, Chennai, Tamil Nadu |
December 08 – 10, 2021 |
| 16. |
Dr. S. Surendarnath |
Investigation on Tribological behavior of AA7075 reinforced with SiC & TiC Composites for Automobile Applications |
2nd Virtual Tribology Research Symposium (ITRS 2021) |
SRM University, Chennai, Tamil Nadu |
December 08 – 10, 2021 |
| 17. |
Dr. S. Surendarnath |
Wear Characteristics of Hot Dip Aluminized of Mild Steel |
2nd Virtual Tribology Research Symposium (ITRS 2021) |
SRM University, Chennai, Tamil Nadu |
December 08 – 10, 2021 |
| 18. |
Dr. S. Surendarnath |
Studies on Engine Vibration Isolation Behaviors of AA6061-SiC Metal Matrix Engine Mounts for Diesel Engines |
International Conference on Thermal Analysis and Energy Systems (ICTAES 2021) |
Heat Pump Research Institute Associate with Al-Frabi Kazakh National University, Republic of Kazakhastan |
December 22 – 24, 2021 |
| 19. |
Dr. S. Surendarnath |
Optimization of Properties of Nanofluids to enhance the heat transfer characteristics and Collector Efficiency of Solar Flat Plate Collector using MCDM Technique |
International Conference on Thermal Analysis and Energy Systems (ICTAES 2021) |
Heat Pump Research Institute Associate with Al-Frabi Kazakh National University, Republic of Kazakhastan |
December 22 – 24, 2021 |
